Building Safety
Contact Information
Department of Building Safety
908 Big Horn Avenue
PO Box 638
Worland, WY 82401
307-347-8276
Building Official
Eagle Engineering & Surveying, Inc.
Jesse Frisbee
Department of Building Safety
The mission of the Department of Building Safety is to enforce building safety standards through adopted building codes. These codes shall provide a minimum standard of Life, Fire and Structural safety for the residents and visitors within the City of Worland.
Please see the Building Permit section for details on Building Permits, Contractor Licensing Section for details on Contractor Licensing. Don't forget to visit the Planning and Zoning Department to verify zoning review requirements for your project
If you are looking for a licensed contractor for your project please see the PDF below, any building questions should be directed to the Building Official
Building Permits
A building permit is required to perform work on most buildings or structures within the city limits. Some examples include, new construction, additions, renovations, interior remodeling, finishing a basement, building a garage, adding a deck, plumbing, heating/cooling, changing use of a building, etc.
All building permits require some form of supporting documentation. That documentation can range from a simple detailed description of the size and type of water heater to be installed to full professionally rendered plans and specifications. Review the links below for basic information on how to begin a building permit application. After you have reviewed this information please contact the Building Department.
Each building permit issued is required to have a minimum of one (1) final inspection. Most projects require several inspections to verify code compliance. All inspections require 24-hour notice and notification is the responsibility of the permit holder.
The rule of thumb is “Never cover any construction component before it is inspected”.
Current Adopted Codes for within City limits:
2021 International Building Code (IBC) with amendments
2021 International Residential Code (IRC) with amendments
2021 International Plumbing Code (IPC) with amendments
2021 International Mechanical Code (IMC) with amendments
2021 International Fuel Gas Code (IFGC) with amendments
2021 International Existing Building Code (IEBC) with amendments
2021 International Fire Code (IFC) with amendments
2021 ICC A1 17.1-2017
Title 24 Code of Federal Regulations 3280 and 3285 (Manufactured Home)
Plan requirements in line with the State Fire Marshals Requirements for Commercial Buildings
2021 International Building Code (IBC) with amendments
2021 International Residential Code (IRC) with amendments
2021 International Plumbing Code (IPC) with amendments
2021 International Mechanical Code (IMC) with amendments
2021 International Fuel Gas Code (IFGC) with amendments
2021 International Existing Building Code (IEBC) with amendments
2021 International Fire Code (IFC) with amendments
2021 ICC A1 17.1-2017
Title 24 Code of Federal Regulations 3280 and 3285 (Manufactured Home)
Plan requirements in line with the State Fire Marshals Requirements for Commercial Buildings
Residential Plans (New and Remodel)
Submittal documents consisting of construction documents, and other data shall be submitted in a digital format AutoCAD (DWG) or PDF format with each permit application. A full set of construction documents shall be prepared by a registered design professional where required by the statutes of the jurisdiction in which the project is to be constructed. Where special conditions exist, the building official is authorized to require additional construction documents to be prepared by a registered design professional.
Submittal documents consisting of construction documents, and other data shall be submitted in a digital format AutoCAD (DWG) or PDF format with each permit application. A full set of construction documents shall be prepared by a registered design professional where required by the statutes of the jurisdiction in which the project is to be constructed. Where special conditions exist, the building official is authorized to require additional construction documents to be prepared by a registered design professional.
Commercial Plans (New and Remodel)
Submittal documents consisting of construction documents, statement of special inspections, geotechnical report, and other data shall be submitted in a digital format AutoCAD (DWG), with each permit application. The construction documents shall be prepared by a registered design professional where required by the statutes of the jurisdiction in which the project is to be constructed. Where special conditions exist, the building official is authorized to require additional constructions documents to be prepared by a registered design professional.
Submittal documents consisting of construction documents, statement of special inspections, geotechnical report, and other data shall be submitted in a digital format AutoCAD (DWG), with each permit application. The construction documents shall be prepared by a registered design professional where required by the statutes of the jurisdiction in which the project is to be constructed. Where special conditions exist, the building official is authorized to require additional constructions documents to be prepared by a registered design professional.
The following files are in PDF format for download and will open in a new window
Contractor Licensing Information
Contractor who work within Worland City limits may be required to licensed with the City to conduct business. Please see the following information for details, any questions should be directed to our Building Official.
Contractor Licensing Types
- General Building A (all structures)
- General Building B (3 stories and under commercial and residential work more than 2 units)
- Residential (one and two family dwelling, and certain townhomes)
- Framing (3 stories and under wood framing)
- Drywall (Drywall installation Commercial and Residential)
- Structural Concrete (Installation of load bearing concrete)
- Structural Masonry (Installation of load bearing masonry)
- Structural Steel (Installation of load bearing steel)
- Manufactured Home Installer (Installs HUD Manufactured Homes)
- General Roofing (Roofing systems on all Commercial and Residential)
- Shingle Roofing (Shingle Roofing Systems Commercial and Residential)
- Master Plumber (water, sewer)
- Master Plumber w/FG (water, sewer, fuel gas)
- Master HVAC (heating, ventilation, air conditioning, gas fireplaces, fuel gas)
- Master Refrigeration (refrigeration systems)
- Master Gas Pipe (fuel gas)
- Excavation - Right of Way (excavation in any City ROW)
- Hearth Systems (Fireplaces)
- Landscaping Backflow Installer (sprinkler and landscaping backflow installer)
- Signs
Please see the following PDF files for details on Contractor Licensing Types, Individual Types and Contractor Application